Product ID:119 4570 COLOREDGE 1525 BLACK DEVELOPER
MSDS Date:04/16/1997
FSC:6850
NIIN:01-387-8960
MSDS Number: CGLXW

CANON IND

30-2 SHIRMOMARUKO 3 CHOME OMTA-KU
TOKYO
JA

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: EO160

EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES

ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

FERRITE(MIXTURE CONTAINING INGREDS #2,3,4)

CAS: 1317-54-0

RTECS: LK0495000

Fraction By Weight: 85-95%

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2;96

CUPRIC OXIDE

CAS: 1317-38-0

RTECS: GL7900000

Fraction By Weight: <15%

OSHA PEL 1 MG CU/M3

ACGIH TLV: 1 MG CU/M3

ZINC OXIDE (SARA 313) (CERCLA)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: <15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

POLYESTER RESIN

CAS: 39382-25-7

Fraction By Weight: 3-7%

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9596

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:EXPECTED TO BE LOW HAZ FOR
RECOMMENDED HNDLG.EYE:NO SPECIFIC HAZ KNOWN.MAY CAUSE TRANSIENT
IRRIT.SKIN:EXPECTED TO BE LOW HAZARD FOR RECOMMENDED
HNDLG.INGEST:EXPECTED TO BE LOW INGEST HAZ.OVEREXP O TO CARBON
BLACK DUST MAY RESULT IN IRRIT OF RESP TRACT & BENIGN DEPOSITION OF
CARBON BLACK IN LUNG.
Explanation of Carcinogenicity:PER MSDS:IARC-CARBON BLACK:2B.
Effects of Overexposure:TRANSIENT EYE IRRITATION.IRRITATION OF
RESPIRATORY TRACT & BENIGN DEPOSITION OF CARBON BLACK IN LUNG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:SYMPTOMATIC,MOVE TO FRESH AIR.TREAT
SYMPTOMATICALLY.SYMPTOMS PERSIST GET MED ATTN.EYE:MATL THAT
CONTACTS EYE SHOULD BE WASHED OUT IMMED W/WATER.GET MED ATTN IF
SYMPTOMS OCCUR.SKIN:WASH W/SOAP/WA TER.GET MED ATTN IF SYMPTOMS
OCCUR.INGEST:DRINK 1-2 GLASSES OF WATER.SEEK MED ATTN.NEVER GIVE
ANYTHING BY MOUTH TO UNCONSC PERSON.

Autoignition Temp:Autoignition Temp Text:NP
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE (CO2), DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:POWDERED MATERIAL MAY FORM EXPLOSIVE
DUST-AIR MIXTURES.COMBUSTIBLE SOLID.

Spill Release Procedures:DONT USE VACUUM CLEANER TO CLEAN UP SPILLS OF
POWDERED TONERS.THE VERY FINE PARTICLES CAN CAUSE FIRE OR
EXPLOSION.SWEEP MATERIAL ONTO PAPER & PLACE IN FIBER CARTON.AVOID
GENERATION OF DUST.CLEAN SURFA CE THOROUGHLY TO REMOVE RESIDUAL
CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATH DUST.USE W/ADEQUATE
VENTI.POWDERED MATL MAY FORM EXPLO DUST-AIR MIXTURES.MIN DUST
GENERATION/ACCUMULATION.KEEP AWAY FRM IGN SOURCES.
Other Precautions:MATL HAS NOT BEEN TESTED FOR ENVIRO EFFECTS.IN SPILL
SITUATION THIS MATL MAY BE VISUALLY UNPLEASANT;HOWEVER,ITS NOT
EXPECTED TO CAUSE ANY ADVERSE ENVIRO EFFECTS.REF NFPA
PAMPHLET#654:"PREVENTION OF FI RE/DUST EXPLO IN
CHEM/DYE/PHARM/(SUPPLE)

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD VENTILATION(TYPICALLY 4-6 RM VOL/HR)SHOULD BE
USED.VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS.
Protective Gloves:PROL/REP CONTACT IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS(OR GOGG)
Other Protective Equipment:WASHING FACILITIES.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.GOOD INDUSTRIAL
HYG PRAC TO MIN EYE CONTACT.
Supplemental Safety and Health
OTHER PRECAUT:PLASTICS INDUSTRIES".KEEP FRM CONTACT W/OXIDIZING MATLS.

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:N/AVAI
Decomp Temp:Decomp Text:NP
Vapor Pres:NEGLIGIBLE
Vapor Density:N/AVAI
Spec Gravity:1.0-4.5
pH:NA
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID, BLACK COLOR, SLIGHT ODOR
Percent Volatiles by Volume:NEGLIG
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HAZ COMBUSTION PRODUCTS:CARBON DIOXIDE
AND CARBON MONOXIDE. OXIDES OF IRON.

Waste Disposal Methods:INCINERATE OR LANDFILL.CAN BE INCINERATED WHEN
IN COMPLIANCE WITH LOC REGULATIONS.DISCHARGE/TREATMENT/DISPO MAY BE
SUBJ TO NAT/STATE/LOC LAWS.CHEM SUBJ TO REPORT REQMTS SEC 313 TITLE
III SARA/40CFR372 :COPPER OXIDE;ZINCE OXIDE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.